Resources: Support Documents and Manuals

Circuit Breaker Replacement Instructions (pn 97175010)

Posted by Morgan Marks on Jan 22, 2013 3:42:00 PM

This document describes how to replace a single-pole, single-throw, 30A circuit breaker in AlphaEclipse™ Excite™, RoadStar™, and StreetSmart™ signs.

In this "D" revision, pictures, callouts, and the document layout was updated.

Document date: 5/16/08

Circuit Breaker Replacement Instructions (pn 97175010).pdf

Topics: Alpha Series, Installation Instructions

Alpha 7000 Series Back-to-Back Sign Manual (pn 1024600101)

Posted by Morgan Marks on Jan 22, 2013 12:49:00 PM

This manual describes how to install Alpha 7000 Series signs in a back-to-back configuration and connect them to a network or Ethernet connection.

Document date: 10/3/06

Alpha 7000 Series Back-to-Back Sign Manual (pn 1024600101).pdf

Topics: Alpha Series, Installation Instructions

Alpha 220 DC-Powered LED Sign Installation Instructions (pn 97014011)

Posted by Morgan Marks on Jan 22, 2013 11:34:00 AM

This document describes the 5V-powered version of the Alpha® 220 sign. An equipment overview and information on mounting the sign is included.

In this "A" version of the manual, changes were made to Adaptive's logo and trademark information, as well as to the safety messages and equipment label.

Document date: 1/28/04

Alpha 220 DC-Powered LED Sign Installation Instructions (pn 97014011).pdf

Topics: Alpha Series, Installation Instructions

Alpha Series Sign Installation Instructions (pn 97000043)

Posted by Morgan Marks on Jan 22, 2013 11:34:00 AM

These instructions show how to change the serial address and how to mount ALPHA series signs.

In the "C" version of this manual, information on the ALPHA Series 220C sign was added.

Document date: 2/29/00

Alpha Series Sign Installation Instructions (pn 97000043).pdf

Topics: Alpha Series, Installation Instructions

Alpha 4000, 7000 and 9000 Series Two- and Three-Sided Installation Instructions (pn 97018007)

Posted by Morgan Marks on Jan 22, 2013 11:28:00 AM

This manual describes how to mount signs hanging in two-sided (back-to-back) and three-sided (triangular) formation.

These instructions are for Alpha® 4000 series signs (NEMA2 and non-NEMA2), Alpha® 7000 series signs (NEMA2 and non-NEMA2), and AlphaPremiere™ 9000 series signs.

NOTE: In each series of signs, the x080 (e.g., 4080) sign cannot be mounted in two-sided (back-to-back) formation because there is not enough width for the power supplies to fit side-by-side.

In this "C" version of the manual, updates were made to Adaptive's trademark and logo information, and to the safety messages.

Document date: 4/14/04

Alpha 4000, 7000, and 9000 Series Two- and Three-Sided Installation Instructions (pn 97018007).pdf

Topics: Alpha Series, Installation Instructions

Alpha 4080C Installation Instructions (pn 97018006)

Posted by Morgan Marks on Jan 22, 2013 11:28:00 AM

These instructions show how to change the serial address and how to mount the Alpha® 4080C sign.

Document date: 7/23/97

Alpha 4080C Installation Instructions (pn 97018006).pdf

Topics: Alpha Series, Installation Instructions

Alpha 210-220 Instruction Manual (pn 97052209)

Posted by Morgan Marks on Jan 22, 2013 11:28:00 AM

This manual describes how to install and mount an ALPHA 210 or ALPHA 220 sign. Information on keyboard operation, and how to send and edit messages, is also included.

The ALPHA 221 Addendum is included with this manual.

Document date: 12/1/86

Alpha 210-220 Instruction Manual (pn 97052209).pdf

Topics: Alpha Series, Instruction Manual